ULTRAPROBE ACCESSORIES FOR YOUR FACILITY

Provides 2 hours of operation time for FLIR Si2 series acoustic imagers

Experience a trouble-free installation process for your ultrasound sensor with our Grease Fitting Adapter. Our adapter offers two configuration options for mounting a single point lubricator or zerk grease fitting, in both direct or remote mount positions. This adapter features an innovative design that allows for easy installation and seamlessly integrates your ultrasound sensor and single-point lubricator into one convenient solution.

Alkaline battery, dust cover, grease pouch w/PL10 Motor Bearing Grease

*Price increases with grease type

Single-point remote installation kit – 10ft or 20ft, distribution tubing, O.D. ¼” (6mm), Nylon, prefilled or empty

This extremely powerful ultrasonic transmitter contains a multiple array of four transducers that produce UE Systems' patented warble tone to cover a circular pattern of 360°.

Permanently mounted sensor with approx. 2’ cable readable by the Ultraprobe.

Mounting kit for thermal isolation, suitable for the UltraTrak 850S and RAS Sensors.

Bend this probe to odd angles to locate sound sources in hard-to-reach areas.

Shielded cable compatible with either module for hard-to-reach areas. Standard length is 8ft (2.4m), but lengths up to 50ft (15m) are available.

A three-part leak tag system for your compressed air leak surveys:

1. The Leak Location Marker

2. Leak Data – includes relevant test information. Use this to log information for reference and to act as a work order.

3. The Repair Tag – This acts as a follow up to document the repair and to assure that it was performed correctly.

A specialized module to help locate low level pressure and vacuum leaks.

The UWC detects ultrasound from a greater distance with higher pinpoint accuracy. This parabolic shaped receiver helps bring distant leaks and electrical emissions closer.

The LRML doubles the detection range of standard scanning modules while also pinpointing ultrasonic leaks and electric emissions from greater distances. An additional laser pointer is optional.

Keep hands free for walking routes and climbing up and down ladders in your facility. There is one holster for the Ultraprobe, module, and headphones, and another holster for accessories.

Extend this probe to test mechanical components and bearings in hard-to-reach areas (up to 78in/2m).

Extend and bend this probe to odd angles to locate sounds in hard-to-reach and awkward areas (up to 78in/2m).

Ultrasonic test point that comes complete with epoxy kit. Magnetic RAS or stethoscope targets for permanent installation, ensuring a consistent test point.

Quickly and easily inspect enclosed or hard-to-reach bearings with permanently mounted Remote Access Sensors.

Run multiple BNC-to-BNC cables into the switch box and a splitter will lead them to one cable only, then attach the RAM to this cable to plug in your Ultraprobe and inspect 4-8 test points.

Motor fin mount pads for Ultrasonic testing, available in ½”width-1.25” height, ¼” width-1”height, ½” width-2” height, and ¼” width-1.75” height

David Clark Bluetooth Headset #42021G-05 with a transmitter for use in high-noise environments. This headset provides ear protection and is conveniently compatible with hard hats. The attached Velcro loop band adjusts for all head sizes.