UE Systems UK & Ireland

UE Systems UK & Ireland

Phone: +44 (0) 7930 352 188 Email: chrish@uesystems.com

Spectralyzer

Your free software for sound spectral analysis

Explore

Electrical Inspection Online Course

Learn how to use Ultrasound to detect electrical failures

Explore

Sound Files

What different types of electrical issues sound like

Listen

Article: Ultrasound and Infrared

Read how these two technologies complement each other

Read

When electrical systems such as switch gear, transformers, insulators or disconnects and splices fail, the results can be catastrophic.

Ultrasound inspection can be performed at all voltage levels (low, medium and high) and is used to detect:

  • Corona
  • Partial discharge or tracking
  • Arcing
  • Mechanical vibrations (transformers)

SAFETYUse an ultrasonic instrument to scan enclosed electrical gear prior to opening for further inspection.

EFFICIENCYDue to the characteristics of Ultrasound, an Ultraprobe can pinpoint the location of a discharge quickly and easily.

ACCURATE DIAGNOSTICUltrasound spectral analysis software helps identify sound patterns related to electrical emissions.

How Ultrasonic Electrical Inspection Works

Partial discharge/tracking, arcing and corona all produce ionization which disturbs the surrounding air molecules. An Ultraprobe detects high frequency sounds produced by these emissions and translates them (via heterodyning) down into the audible ranges. The specific sound quality of each type of emission is heard in headphones while the intensity of the signal is observed on a display panel. These sounds can be recorded and analyzed through ultrasound spectrum analysis software for diagnosis & reporting.

Normally, electrical equipment should be silent, although some equipment such as transformers may produce a constant 50 cycle hum, or some steady mechanical noises. These should not be confused with the erratic, sizzling frying, uneven and popping sound of an electrical discharge.

Inspection & Diagnostic

Before beginning any inspection of electric equipment, be sure to review your plant or company’s safety procedures. We scan the equipment with the Ultraprobe and because of the characteristics of Ultrasound can pinpoint the location of discharge quite fast & easy. When it is not possible to get close to the test equipment, such as for safety reasons or while inspecting over-head power lines, use a parabolic microphone. UE Systems has two models, a parabolic dish – the Ultrasonic Waveform Concentrator (UWC) and the Long Range Module (LRM). These highly sensitive, directional sensors double the detection distance of a standard scanning module and provide pinpoint accuracy.

For more accurate diagnosis, ultrasound spectral analysis software helps identify sound patterns related to electrical emissions through spectral (FFT) and Time Series screens. Some of the more advanced instruments have on-board sound recording while others have on-board spectral analysis screens to help provide a diagnosis on the spot.

We have a range of instruments available from cost effective leak detector to digital tools to enable reporting functions.

We recommend these instruments for electrical inspection: