Contact Us

    Contact Us

    Toll Free: 800.223.1325 Email: info@uesystems.com

    Ultraprobe 2000

    Durable analog Ultrasound detector with adjustable frequency for quick and accurate inspection

    • Easy to use
    • Fast and accurate
    • Adjustable Frequency from 20 kHz to 100 kHz
    • Analogue meter with meter mode function
    • ATEX version available for hazardous environments
    • Ideal for point & shoot troubleshooting

    The industry’s most comprehensive analog ultrasound instrument.

    Fast, accurate, and designed for ease of use, it often takes no more than 15 minutes to become competent in ultrasonic testing using the Ultraprobe 2000.

    Find compressed air and faulty steam traps, prevent machinery failure & listen to electrical systems for discharges.

    Why Choose this instrument?

    • Easy to use
    • Adjustable Frequency from 20 kHz  to 100 kHz
    • Accurate analogue meter with meter mode function
    • Ideally for point & shoot trouble shooting

    Ultrasound Technology is the smart approach to inspection:

    • Ultrasound is very directional and localized
    • Ultrasound can be easily blocked or shielded
    • Ultrasound instruments can be used in noisy environments
    • Changes in Ultrasound provide early warning of potential problems
    • Ultrasound instruments are easy to use!

    The Ultraprobe 2000 also enables data reporting through three modes:

    • Through auditory channels (via a headset that has been specifically selected for heavy duty industrial use)
    • Through a uniquely designed bi-modal analog meter
    • Through the ability to interface with vibration analyzers, & sound recording devices via the heterodyned output.

    For use in hazardous environments, an ATEX or EX rated model is also available.

    The Ultraprobe 2000 can be adapted to test practically any problem in operating equipment with such features as:

    • FREQUENCY TUNING enables a user to tune into problem “sounds” while minimizing background interference.
    • METER MODE selection adjusts the meter response from a real time response to an averaging response. This feature allows accurate adjustments for leak detection and for mechanical analysis.

    The Ultraprobe 2000 can heterodyne ultrasound into audible range providing accurate sound reproduction.

    Sensitive only to ultrasonic frequencies, the Ultraprobe 2000 will not respond to the low frequency noises often associated with most plant equipment. Therefore, the instrument can be effectively utilized in very loud factory environments.

    This unique instrument offers a unique & accurate listening experience for your troubleshooting needs!

    Complete with everything you need for accurate route inspection, the Ultraprobe® 2000 includes standard:

    • Ultraprobe housing with metered pistol grip, ballistic meter, frequency tuning dial, 10 turn potentiometer, numerically calibrated sensitivity dial with selection lock, bi-modal meter selector switch, battery, battery indicator light, battery recharger receptacle and head set receptacle.
    • Deluxe industrial noise reducing headset
    • Battery recharge kit for main housing and warble tone generator
    • Zero Halliburton aluminum carrying case

    For further components per kit configuration:

    UP2000LRM: Ultraprobe 2000 Long Range Kit
    • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
    • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
    • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
    • Extension probe kit to increase stethoscope contact range to 31 inch (78 cm)
    • Warble tone generator with amplitude selection switch for use in tone test method
    • Long range module (LRM-2) for more accurate & extended range of detection for leak detection or electrical emissions
    UP2000CFM: Ultraprobe 2000 Close Focus Kit
    • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
    • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
    • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
    • Extension probe kit to increase stethoscope contact range to 31 inch (78 cm)
    • Warble tone generator with amplitude selection switch for use in tone test method
    • Close focus module (CFM-2) for low level leaks & vacuum leak detection
    UP2000KT: Ultraprobe 2000 Complete Kit
    • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
    • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
    • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
    • Extension probe kit to increase stethoscope contact range to 31 inch (78 cm)
    • Warble tone generator with amplitude selection switch for use in tone test method
    UP2000SC: Ultraprobe 2000 Stethoscope / Scanner Kit
    • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
    • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
    • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
    • Extension probe kit to increase stethoscope contact range to 31 inch (78 cm)
    UP2000S: Ultraprobe 2000 Scanner Kit
    • Trisonic scanning module for locating airborne ultrasound such as pressure, vacuum and electrical emissions
    • Rubber focusing probe for narrowing reception band of scanning module and for blocking out ambient ultrasound
    UP2000C: Ultraprobe 2000 Stethoscope Kit
    • Stethoscope (contact type) probe for monitoring internal ultrasound such as in bearings, steam traps and valves
    • Extension probe kit to increase stethoscope contact range to 31 inch (78 cm)

    Specifications overview Ultraprobe 2000

    Construction
    Hand-held metered pistol type made with aluminum and ABS plastic
    Circuitry
    Solid State heterodyne receiver with temperature compensation
    Frequency Response
    Frequency detects ultrasonic frequencies between 20 kHz and 100 kHz, continuously variable Frequencies are converted to 50 kHz to 3 kHz audio
    Probes
    Scanning Module:
    Patented Trisonic plug-in type consisting of a phrased array of multiple transducers for airborne ultrasound. This probe is shielded against RF interference.

    Rubber Focusing Probe (flexible):
    Slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit is at maximum sensitivity.

    Stethoscope Module:
    Plug-in type, insulated probe with RF shielding; 4 1/2′ (11,4 cm) long stainless steel probe tip, conically shaped for uniform surface contact.

    Stethoscope Extension Kit:
    3-piece, segmented metal rods to increase stethoscope contact range for 20” (50,8 cm) and 31” (76.2 cm).
    Transmitter
    Patented warble tone transmission
    Headset
    Noise isolating type: Double headset wired monophonic. Impedance 16 ohms. Over 23 dB os noise attenuation. Meets or exceeds ANSI specifications and OSHA standards. For hard hat use.
    Indicators
    Ballastic output meter; linear calibration scale of 0-100 for logging relative measurements.
    Meter is accurate 1% throughout entire scale. Low Level Battery LED indicator for main housing internal power supply.
    Battery
    Self contained NiMH rechargeable. RECHARGING SYSTEM: Standard 110V. Also availible in 220V.
    Features
    Frequency Tuning Adjustment Dial: 20-100 kHz with “fixed band” position for ultra-narrow frequency response.
    Bi-Modal Meter Switch for logarithmic and linear meter scale adjustments.
    Optional Auxiliary Mode selection for chart recorder output: 0-50 mV.
    Sensitivity Control – Precision 10-turn adjustment dial with numerically calibrated sensitivity increments for finite gain adjustment.
    Spring loaded trigger switch
    Overall Size
    Complete kit in Zero Halliburton aluminum carrying case:
    18.5 x 14.5 6.5 (47 x 37 x 17 cm)
    Pistol unit: 2 lbs. (0.9 kg)
    Complete carrying case: 14 lbs. (6.4 kg)
    Sensitivity
    Detects 0.005 (0.127 mm) diameter leak @ 5 psi (0.34 bar) at a distance of 50ft. (15.24 m)
    Threshold
    1 x 10-2 std. cc/sec to 1 x 10-3std. cc/sec
    Warranty
    1-year parts/labor standard.
    5 years with completed warranty registration card
    Display Modes
    Logarithmic and linear
    * depends on leak configuration
    ** specify Ex rating if needed at time of order

    Brochures & Manuals

    Optional Accessories

    DHC-2BT-TM: Deluxe bluetooth headset with transmitter for use with hardhat

    Wireless Bluetooth headset with transmitter for use in high noise environments. Acts as hearing protection device. Convenient for use with hard hats. Velcro loop head band adjusts for all sizes.

    RAS-MT: Remote Access Sensor

    Magnetically mounted contact probe with cable for testing consistency and for hard to reach test points. Must be used in combination with a Remote Access Module (RAM).

    UTP: Ultrasonic Test Point

    Ultrasonic test point complete with epoxy kit. Magnetic RAS or Stethoscope targets for permanent installation insuring consistent test point target. Specifications >>

    RAS: Remote Access Sensor

    Permanent mounted sensor with a 25′ (7,5m) cable, readable by the Ultraprobe.

    HTS-2: Holster set

    One for the Ultraprobe pistol, module and headphones, the other for accessories. Keeps hands free for walking routes and climbing up and down ladders.

    LRM-2: Long Range Module

    Detect Ultrasound at a greater distance with higher pinpoint accuracy. This parabolic shaped receiver helps to bring distant leaks or electrical emissions close-up.

    CFM-2: Close Focus Module

    A specialized module to help locate LOW LEVEL pressure and vacuum leaks.

    TFCM-2: Telescoping Contact Module with RAM (Remote Access Module)

    Extend this probe to test mechanical components / bearings in hard to reach areas. (up to 2 m / 78 inch).

    TFSM-2: Telescoping & Flexible Scanning Module with RAM (Remote Access Module)

    Extend and bend this probe to odd angles to locate sound sources in hard to reach areas. (up to 78 inch / 2 m.).

    UWC-2: Ultrasonic Wave Form Concentrator (Parabolic Dish)

    The UWC doubles the detection range of standard scanning modules and pinpoints ultrasonic leaks & electric emissions at great distances.

    FSM-2: Flexible Scanning Module

    Bend this probe to odd angles to locate sound sources in hard to reach areas.

    EXC-2: Module Interconnection Cable

    Shielded cable, works with either module for hard to reach areas. Standard length: 8′ (2.4 m.). Lengths up to 50 ft. are available.

    RAM-2: Remote Access Module

    Adaptor enabling Ultraprobe 2000 to read RAS Sensors.

    Certificates

    Download a copy of the DNV Hatch testing certificate >

    Download a copy of the UP2000 CE declaration of conformity >

    See the UP2000ATEX section for ATEX information >

    Download a copy of the UP2000 ABS Product Assessment >

    Ultraprobe 2000 is covered by one or more of the following patents:
    0151115; 0303776; 0315199; 1206586; 1297576; 1881263; 2562758; 2689339; 4416145; 4823600; 5955670; 6122966; 6339961; 6341518; 6415645; 6655214; 6707762; 6804992

    Ultraprobe 2000 meets and exceeds ASTM E1002-2005 requirements for leak detection. Government codes NSN:
    6635-01-156-3927, FSCM (CAGE) Code: 59202. Table of allowance #s: 788, 404, 576, 583, 607

    This product is suitable for

    Leak Detection

    Read more

    Steam Trap & Valve Inspection

    Read more

    Bearing Inspection & Lubrication

    Read more