ULTRAPROBE ACCESSORIES FOR YOUR FACILITY

Bend this probe to odd angles to locate sound sources in hard-to-reach areas.

Shielded cable compatible with either module for hard-to-reach areas. Standard length is 8ft (2.4m), but lengths up to 50ft (15m) are available.

A three-part leak tag system for your compressed air leak surveys:

1. The Leak Location Marker

2. Leak Data – includes relevant test information. Use this to log information for reference and to act as a work order.

3. The Repair Tag – This acts as a follow up to document the repair and to assure that it was performed correctly.

A specialized module to help locate low level pressure and vacuum leaks.

The UWC detects ultrasound from a greater distance with higher pinpoint accuracy. This parabolic shaped receiver helps bring distant leaks and electrical emissions closer.

The LRML doubles the detection range of standard scanning modules while also pinpointing ultrasonic leaks and electric emissions from greater distances. An additional laser pointer is optional.

Keep hands free for walking routes and climbing up and down ladders in your facility. There is one holster for the Ultraprobe, module, and headphones, and another holster for accessories.

Extend this probe to test mechanical components and bearings in hard-to-reach areas (up to 78in/2m).

Extend and bend this probe to odd angles to locate sounds in hard-to-reach and awkward areas (up to 78in/2m).

Ultrasonic test point that comes complete with epoxy kit. Magnetic RAS or stethoscope targets for permanent installation, ensuring a consistent test point.

Quickly and easily inspect enclosed or hard-to-reach bearings with permanently mounted Remote Access Sensors.

Run multiple BNC-to-BNC cables into the switch box and a splitter will lead them to one cable only, then attach the RAM to this cable to plug in your Ultraprobe and inspect 4-8 test points.

Motor fin mount pads for Ultrasonic testing, available in ½”width-1.25” height, ¼” width-1”height, ½” width-2” height, and ¼” width-1.75” height

David Clark Bluetooth Headset #42021G-05 with a transmitter for use in high-noise environments. This headset provides ear protection and is conveniently compatible with hard hats. The attached Velcro loop band adjusts for all head sizes.